Selasa dan Kamis yang lalu (5 dan 7 april) dilangsungkan praktikum mata kuliah alat penukar kalor, alat uji yang digunakan adalah Water to Water Heat Exchanger dan Air to Water Heat Exchanger.

untuk tugas individu, jurnal harus terbitan tahun 2010-2011 (cari di science direct) dan agar tidak terjadi bentrok judul jurnal, post nama dan judul jurnal pada reply di blog ini. tambahan, untuk yang melakukan pengolahan data air to water, flow rate air adalah 3.24 x 10^-5 m3/s dan udara 1.68x 10^-4 m3/s.

DOWNLOAD panduan laporan praktikum.

laporan dikumpulkan tanggal 21/04/2011,paling telat jam 17:00 di lab, ruang 311.

### Like this:

Like Loading...

*Related*

Effect of fin pitches on the air-side performance of crimped spiral fin-and-tube

heat exchangers with a multipass parallel and counter cross-flow configuration

Optimization of high-pressure shell-and-tube heat Exchanger for syngas cooling in an IGCC

influence of nanofluids on parallel flow square microchannel heat exchanger performance

Experimental investigation of nanofluids on sintered heat pipe thermal performance

Correlations for wet surface ratio of ﬁn-and-tube heat exchangers

A New Approach in Evaluation of Thermal Contact Conductance of tube-Fin Heat Exchanger….

Correlations for wet surface ratio of fin-and-tube heat exchangers

Heat transfer and pressure drop during HFC refrigerant saturated vapour

condensation inside a brazed plate heat exchanger

Design optimization of shell-and-tube heat exchanger using particle swarm

optimization technique

Turbulent heat transfer enhancement in a heat exchanger using helically

corrugated tube

Optimization of heat exchangers with vortex-generator fin by Taguchi method

Economic optimization of shell and tube heat exchanger based on

constructal theory

An experimental study of thermal performance of shell-and-coil heat exchangers

Multi-objective optimization of shell and tubenext term heat exchangers

Efficiency of heat transfer in heat exchangers with wire mesh packing

A study on the simulation and experiment of a microchannel counter-ﬂow

heat exchanger

A study on the simulation and experiment of a microchannel counter-ﬂow

heat exchanger

Effectiveness–thermal resistance method for heat exchanger design and analysis

Effectiveness–thermal resistance method for heat exchanger design and analysis

Effectiveness–thermal resistance method for heat exchanger design and analysis

Airside performance of herringbone wavy ﬁn-and-tube heat exchangers–data

with larger diameter tube

Inﬂuence of nanoﬂuids on parallel ﬂow square microchannel heat

exchanger performance

A new model for predicting performance of fin-and-tube heat exchanger

under frost condition

Study of carbon dioxide condensation in chevron plate exchangers; heatnext term transfer analysis

experimental investigation of forced conv heat transfer cooeficient in nanofluids of al203 in a double pipe

Cooling enhancement in an air-cooled finned heat exchanger by thin water film evaporation

Heat transfer of nanofluids in a shell and tube heat exchanger

Optimum design of double pipe heat exchanger

Effectiveness–thermal resistance method for heat exchanger design and analysis

Analytical and empirical determination of thermal performance of louvered

heat exchanger – Effects of air flow statistics

A review on the application of horizontal heat pipe heat exchangers in air

conditioning systems in the tropics

Heat transfer and pressure drop studies on a PCM-heat exchanger

module for free cooling applications

Effect of nanofluids on the thermal performance of a flat micro heat pipe

with a rectangular grooved wick

Heat Pipe with PCM for electronic Cooling

Eﬀect of inclination angle on free convection thermal

performance of louver ﬁnned heat exchanger

an experimental study of thermal performance of shell and coil heat exchanger

A new model and analytical solutions for borehole and pile ground heat exchangers

Operation characteristics of cylindrical miniature grooved heat pipe using aqueous

CuO nanofluids

Heat transfer and pressure drop

with multi-region louver ﬁns

Theoretical and experimental examination of air conditioner heat exchangers

Analytical modeling of water condensation in condensing heat exchanger